Quick Answer: What Size Water Supply Tubing Is Used For Icemakers?

What size is the water line to a refrigerator?

Most flexible copper refrigerator water lines have an outside diameter of 1/4 inch. Most flexible plastic water lines for refrigerators come with outside diameters of either 1/4 inch or 5/16 inch, reveals Darrin’s Plumbing Tips.

Which water line goes to the ice maker?

The folks at GE Appliances recommend using a vertical pipe, if available. If you must use a horizontal pipe, place the hole for the valve either on the top or side of the pipe. Avoid using the bottom of the pipe, as this may draw sediment into the ice maker.

What size is ice maker connector?

If you have more time and money, the best thing is to run either a 1/2 inch copper line or a 1/2 galvanized line to the back of your refrigerator with a 1/4 inch connection on it, preferably set in the wall in plastic box.

Can I use plastic tubing for ice maker?

To hook up a refrigerator ice maker, you will need to connect a line of plastic or copper tubing to a cold water line to carry water to the refrigerator. Plastic tubing is less expensive and easier to install than copper.

You might be interested:  Readers ask: How To Connect An Icemaker To The Water Supply?

Can I install a refrigerator without a water line?

You don’t need to hook it up if you don’t want ice and water, the fridge will work fine without it. No, you do not have to install the water line. The ice maker itself doesn’t take up too much space in the freezer, so you could just turn it off and pretend it’s not there.

What is the best water line to use?

HDPE (High Density Polyethylene) pipes are a considered the best choice for underground water lines. What makes this type of piping so great? HDPE pipes are non-toxic, tasteless, and considered a green building material. The pipes are designed to be high crack- and corrosion-resistant.

Does a freezer need a water line?

No.. Only if you have a water hook up for your appliances. A freezer without an ice maker wouldn’t need this. Sorry, there was a problem. You dont need a waterline for a chest freezer.

How do you plumb a refrigerator water line?

push-to-connect fittings & connectors

  1. Step 1: Plan the Water Line Path “
  2. Step 2: Cut Off the Water “
  3. Step 3: Tap the Water Supply “
  4. Step 4: Run the Tubing “
  5. Step 5: Connect the Water Line to the Back of the Refrigerator “
  6. Step 6: Connect the Water Line to the Supply Valve “
  7. Step 7: Check the Connections “

What size are sink supply lines?

Standard Sink Supply Line Size The main pipes, which are the ones that come off the main water supply and the water heater, are 3/4 inches in diameter. The branch lines, which are the ones that feed individual fixtures, are 1/2 inch in diameter.

You might be interested:  How Much Of Earth's Water Supply Is Saline?

Why can’t you use vinyl tubing for ice makers?

Answer: You’re right to be concerned, because plastic tubing to an ice maker is susceptible to cracking and splitting. The constant flow of hot air from the compressor fan in the essentially unventilated space behind the fridge blows over and around the tubing — and eventually makes it quite brittle.

Can you use plastic water line refrigerator?

Sometimes referred to as poly, plastic tubing is flexible and easier to install than rigid copper tubing. Plastic also allows the refrigerator more freedom to move with less fear of damaging the tubing. However, plastic is not as durable as copper, and the tubing can still get damaged and spring a leak.

How long does plastic tubing last?

PVC (Polyvinyl Chloride): Traditionally, PVC piping only lasts between 25-40 years. However, with recent technological advancements, PVC pipes may be able to last 70 years or more.

Leave a Reply

Your email address will not be published. Required fields are marked *