How do I remove a Delta quick connect water line?
How do I disconnect the Quick Connect once it has been attached? Pinch together at the base of the black plastic halves, next to the hose. The top halves will spread apart. Pull down gently.
Can I disconnect my sink sprayer?
When your sprayer begins to leak from the hose, the connection or the sprayer head, you can fix it or remove it. Choosing to remove the sprayer requires capping the connection point on the kitchen faucet. Use pliers to loosen the connector holding the sprayer hose to the faucet.
How do I release my Moen quick connect?
Find the two white plastic tabs at the end of the Quick Connect fitting. Squeeze these tabs together with your fingers or pliers. As you squeeze these tabs they will become pushed into the black plastic housing. This will cause the white button on the opposite side of to pop out a little.
How do I turn off the water to my sink sprayer?
Shut off the hot and cold water valve under the sink. Turn on the faucet until the water is completely empty. Locate the end of the hose opposite the end that is attached to the sprayer. Twist the valve at the base of the hose counterclockwise, with a pair of pliers.
How do you remove a Delta faucet sprayer?
Check whether the sprayer is connected to the head in a snap-on/ quick release connection or a threaded in connection. If quick release connection, press on the button and disconnect the sprayer head. If you have a threaded connection, use a wrench to loosen the nut and disconnect the sprayer head.
How do you replace a sink sprayer hose?
Replace a sink sprayer head and hose Use an open-end or basin wrench to unscrew the sink sprayer hose from the hose nipple. Pull the old sink sprayer and hose out of the sink grommet. Slide the new sink hose through the grommet on top of the sink and reconnect it to the faucet.