How do you remove a compression valve?
To remove a compression-style valve, hold the valve body with an adjustable or open-end wrench, or a slip-joint pliers. Grab the compression nut with another wrench and turn it clockwise to loosen it. Then pull the valve off the copper tubing. Next, remove the old compression sleeve and nut.
Can you reuse compression fittings?
Compression fittings are not as robust as soldered fittings. It can never be reused once they have been compressed. This connector is directly placed over the pipe and the nut is tightened compressing the ferrule between the pipe and the body of the fitting.
How do you change a compression shut off valve?
- Shut Off the Water. The first step is to shut off the water supply to the house at the main shut-off valve, which is usually located near the water meter.
- Remove the Old Valve.
- Install the New Valve.
- Turn On the Water and Check for Leaks.
How do you change a water shut off valve outside?
Replace Your Main Water Shut-Off Valve
- Get a replacement valve. Head over to your local hardware store and grab a replacement valve.
- Detach the water supply lines.
- Remove the old water shut-off valve.
- Prepare the pipe for the new water shut-off valve.
- Install the new water shut-off valve.
What is a sleeve puller?
Sleeve Puller/Installer Sets: Manual Sleeve Puller Set: This manually operated, screw-powered device removes cylinder sleeves from most truck, bus, and tractor engines. Adapter plates (not included in the set) accommodate a wide range of bore sizes. The puller enables one technician to handle sleeve-pulling tasks.
What is an olive puller?
The puller utilises the compression nut to simply pull the olive from the pipe without the need to cut olive. With all the major parts of the tool turned from brass, this olive puller provides a quick and reliable remedy to removing most olives.