FAQ: Where Is The Water Supply Tube On A Electrolux Refridgerator?

Where is refrigerator water supply valve?

The shut-off valve is usually located under the kitchen sink, in the basement, in a crawl space or in the cabinet next to the refrigerator. There will be a small 1/4 inch copper line attached to the cold water supply line using a saddle valve (t-valve).

How do you connect water to Electrolux refrigerator?

refrigerator tube.

  1. Disconnect the refrigerator from the power source.
  2. Attach the adapter (item A above) to the water line,
  3. Remove the plastic protector from the refrigerator tube.
  4. Wrap excess water supply line behind refrigerator so that.
  5. Turn on the water supply, check that there are no leaks in.

How do I find the water line to my refrigerator?

push-to-connect fittings & connectors

  1. Step 1: Plan the Water Line Path “
  2. Step 2: Cut Off the Water “
  3. Step 3: Tap the Water Supply “
  4. Step 4: Run the Tubing “
  5. Step 5: Connect the Water Line to the Back of the Refrigerator “
  6. Step 6: Connect the Water Line to the Supply Valve “
  7. Step 7: Check the Connections “
You might be interested:  How Many People Rely On Water Supply Threatened By Dapl?

How long can a refrigerator water line be?

There is no maximum length, you can run the line as long as needed to reach a main water line. You can also use 1/4″ O.D. (outside dimension) copper tubing with a flared end, approximately 8 ft coiled into 3 turns that are 10″ in diameter.

Can a fridge make ice without a water line?

Can a fridge make ice without a water line? You don’t need to hook it up if you don’t want ice and water, the fridge will work fine without it. No, you do not have to install the water line. The ice maker itself doesn’t take up too much space in the freezer, so you could just turn it off and pretend it’s not there.

How do you drain a refrigerator water line?

How to Drain a Fridge

  1. Unplug the fridge or turn off the power at the breaker before working to drain it.
  2. Sponge out any standing water in the bottom of the refrigerator.
  3. Locate the drain line.
  4. Add a teaspoon of baking soda to two cups of hot water.

Is it OK to turn off water to refrigerator?

There’s no need to shut off the water to the entire kitchen, which can be an inconvenience for you and the family. Instead, control the flow to the fridge by shutting off the water at the site prior to a repair or the installation of a new replacement fridge.

Where is the defrost drain on my Electrolux refrigerator?

The defrost drain on your Electrolux refrigerator is located behind the back panel inside your unit. It is right under the evaporator coils. You will also see a drain pan where the water collects.

You might be interested:  FAQ: How To Connect My Costway 12 Lb Portable Washer To Water Supply?

Why is my Electrolux fridge leaking water?

If water is leaking from the fridge it may be that the V-shaped channel is clogged. The channel is located on the rear wall of the fridge. If you can see vents or a small box sized unit you have located it. Please ensure it is kept clean and free of clogging.

How much does it cost to install a water line for a refrigerator?

Refrigerator Water Line Installation Cost The price to install a water line ranges from $70 to $130.

Can a dishwasher and refrigerator be on the same water line?

Your refrigerator can deliver a constant flow of ice and cooled water. And your dishwasher needs a hot water supply and a drain to make your cleaning duty simpler. This too is a 1/4″ connection, so either a dual valve is added on the hot water supply or a separate valve is installed there.

Leave a Reply

Your email address will not be published. Required fields are marked *