FAQ: How To Install A New Toilet Water Supply Line?

Are toilet water supply lines Universal?

Built to last this universal design fits all common toilets and valves. Size adapters are included with this supply line that fits 3/8 in. Replacing old, or leaking toilet connectors is easy with Fluidmaster’s universal toilet supply lines.

Are all toilet water supply lines the same size?

Typically they are 3/8” in diameter, but toilet supply line size can vary in length, usually anywhere from 9” to 20”. Measure for accuracy to ensure you are buying a part that will match your installation. A flexible line is ideal because its pliability allows you to bend the part as needed.

Where does toilet supply line go?

The toilet supply line is the flexible metal hose that runs from the toilet to the valve. Place a small bucket on the floor under the valve to catch any excess water that escapes from the line before you remove it. Use a crescent wrench to remove the bolt that connects the supply line to the valve.

You might be interested:  Readers ask: How To Turn On Water Supply To Dishwasher Youtube?

Why is my toilet supply line leaking?

A leak can also be because of worn out washers and/or threads. Turn off the water at the shut off valve and remove the hose. Remember, there will be water in the hose so have something like a small Tupperware or bucket to catch it.

How long do toilet water supply lines last?

A good rule of thumb for replacing supply pipes is: Brass pipes: 80-100 years. Copper pipes: 70-80 years. Galvanized steel pipes: 80-100 years.

Can a toilet supply line be too long?

Ignore the Length The length of the flex line is immaterial. When the shutoff valve on the water pipe is opened to allow water into the line, the water builds up pressure in the flex line regardless of the length. The hot water may be delayed for one or two seconds, but the water pressure will be unaffected.

How high should a toilet supply line be?

Supply Line – One hole positioned between 5 and 10 inches above the finished floor. The supply line should be off-set from the centerline by 5 inches.

What size supply line is needed for a toilet?

The supply line to the toilet is standard 1/2-inch copper or plastic pipe routed from the main water line or a 1/2-inch cold water line. This standard is used throughout the home to supply faucets, showers and any other appliance requiring water, including the washing machine.

How much does Home Depot charge to install a toilet?

How much does Home Depot charge for toilet installation? Home Depot does not hire installers; they subcontract installation to local plumbers and electricians, but they advertise on their site that toilet installation costs $269.

You might be interested:  Question: How Is Irrigation System Hooked Up To Main Water Supply?

How much does a plumber charge to replace a valve?

The cost to install a new water main shut off valve is mostly related to labor, since the materials should run less than $40. Besides material, you can pay between $175 and $250 for a plumber to complete the job.

How much do plumbers charge to replace a toilet shut off valve?

Having a plumber or a handyman replace failing toilet parts like a fill valve or flapper can cost $50-$150 or more, depending on local rates and the worker’s qualifications. Replacing a shutoff valve typically costs $25-$50 and replacing a wax ring (and possibly also the closet flange) might cost $50-$200.

Leave a Reply

Your email address will not be published. Required fields are marked *