FAQ: How To Change Water Supply Line On Toilet?

Are toilet water supply lines Universal?

Built to last this universal design fits all common toilets and valves. Size adapters are included with this supply line that fits 3/8 in. Replacing old, or leaking toilet connectors is easy with Fluidmaster’s universal toilet supply lines.

Are all toilet water supply lines the same size?

Typically they are 3/8” in diameter, but toilet supply line size can vary in length, usually anywhere from 9” to 20”. Measure for accuracy to ensure you are buying a part that will match your installation. A flexible line is ideal because its pliability allows you to bend the part as needed.

Why is my toilet supply line leaking?

A leak can also be because of worn out washers and/or threads. Turn off the water at the shut off valve and remove the hose. Remember, there will be water in the hose so have something like a small Tupperware or bucket to catch it.

How long do toilet supply lines last?

A good rule of thumb for replacing supply pipes is: Brass pipes: 80-100 years. Copper pipes: 70-80 years. Galvanized steel pipes: 80-100 years.

You might be interested:  Often asked: Can I Flush Toilet If Water Supply Is Off What Happens?

What is a plumbing supply line?

Supply Line – a metal or plastic line that carries water from the Main Line to an individual fixture (e.g. faucet, toilet, etc.) in the home.

What is the standard size toilet supply line?

The supply line to the toilet is standard 1/2-inch copper or plastic pipe routed from the main water line or a 1/2-inch cold water line. This standard is used throughout the home to supply faucets, showers and any other appliance requiring water, including the washing machine.

How high should a toilet supply line be?

Supply Line – One hole positioned between 5 and 10 inches above the finished floor. The supply line should be off-set from the centerline by 5 inches.

What size toilet supply line do I need?

When you are picking a toilet supply line make sure it is 7/8 inch to connect to connect to the fill valve. The other side of the supply line needs to match your shut off valve. The most common size is 3/8 compression, but is could be 1/2 compression or 1/2 IPS.

Can a toilet supply line be too long?

Ignore the Length The length of the flex line is immaterial. When the shutoff valve on the water pipe is opened to allow water into the line, the water builds up pressure in the flex line regardless of the length. The hot water may be delayed for one or two seconds, but the water pressure will be unaffected.

What size is my water shut off valve?

Shut-off valves come with different-sized outlet ports. The two most common are 3/8- and 1/2-inch compression or male pipe thread. Faucets connectors aren’t completely standardized, but most have 1/2-inch male pipe thread connectors.

You might be interested:  Readers ask: Why People Get Severe Shock When A Power Supply Cable Is Broken And Fallen On The Ground With Water?

Can you use a faucet supply line on a toilet?

A faucet, toilet, and refrigerator’s ice maker use a similar water supply line. A toilet connects to the angle stop valve with a 3/8-inch compression fitting, and the toilet’s fill valve accepts a 7/8-inch threaded nut.

Leave a Reply

Your email address will not be published. Required fields are marked *